Description
An iron roughnecks is a rig-floor machine that makes up and breaks out drill pipe connections. A spinner turns the pipe quickly, then a torque wrench tightens or loosens the joint, so the crew no longer swings tongs by hand. RIGRS builds fully hydraulic iron roughnecks for 3-1/2 to 8-1/2 in drill pipe and collars, for land rigs [and offshore rigs – confirm]. Send the pipe sizes, torque and the hydraulic supply on your rig and we will confirm the model.
The machine is selected from the tool-joint OD range, required make-up and breakout torque, spinner speed, rig-floor layout, mounting arrangement and available hydraulic supply.
For a retrofit project, send the rig-floor drawing, well-centre position, setback location, tool-joint sizes and hydraulic-system data.
Email: info@rigrs.com
WhatsApp: +86 18615995257
RIGRS Iron Roughnecks Models
| Model | Recommended Application | Pipe Range | Max. Make-Up Torque | Max. Breakout Torque |
|---|---|---|---|---|
| RSW10-D1 | Standard land or offshore drilling rig | 2-7/8 in DP to 9-3/4 in DC | 140,000 N·m / 100,000 ft-lb | 160,000 N·m / 120,000 ft-lb |
| RSW10-E1 | Rail-mounted rig-floor installation | 2-7/8 in DP to 9-3/4 in DC | 140,000 N·m / 100,000 ft-lb | 160,000 N·m / 120,000 ft-lb |
| RSW12-D1 | Ultra-deep well and dual-elevator operation | 2-7/8 in DP to 9-3/4 in DC | 140,000 N·m / 100,000 ft-lb | 160,000 N·m / 120,000 ft-lb |
| RSW08-D1 | Medium-to-high torque drilling application | 2-7/8 in DP to 9-1/2 in DC | 110,000 N·m / 80,000 ft-lb | 140,000 N·m / 100,000 ft-lb |
| RSW06-D1 | Truck-mounted drilling rig | 3-1/2 in DP to 8 in DC | 80,000 N·m / 60,000 ft-lb | 110,000 N·m / 80,000 ft-lb |
How to Select the Iron Roughneck Model
RSW10-D1
Select the RSW10-D1 for conventional drilling rigs requiring the full 100,000 ft-lb make-up and 120,000 ft-lb breakout rating.
Its horizontal travel covers 1,850 to 3,300 mm, making it suitable where the working head must move between a fixed parking position and the well centre.
RSW10-E1 Rail-Mounted Model
The RSW10-E1 uses a rail-mounted positioning arrangement. Horizontal travel is determined by the selected rail length.
This model is suitable when the rig-floor layout requires a defined straight travel path between the parked position and the working area. Rail length and mounting interfaces must be confirming from the rig-floor drawing.
RSW12-D1 for Ultra-Deep Wells
The RSW12-D1 provides the same maximum torque as the RSW10 models but has a longer horizontal working range of 2,365 to 3,840 mm.
It is the preferred configuration for ultra-deep well rigs and projects using dual-elevator operating arrangements. The longer machine depth and higher operating weight must be including in the rig-floor structural and clearance review.
RSW08-D1
The RSW08-D1 covers drill pipe from 2-7/8 in through drill collars up to 9-1/2 in. It provides 80,000 ft-lb maximum make-up torque and 100,000 ft-lb maximum breakout torque.
It is suitable where the full RSW10 torque rating is not required but a broad tubular range and long vertical operating range are needed.
RSW06-D1 for Truck-Mounted Drilling Rigs
The RSW06-D1 is the most compact model in the series. It handles 3-1/2 in drill pipe through 8 in drill collars and provides 60,000 ft-lb make-up torque and 80,000 ft-lb breakout torque.
Its shorter horizontal travel and lower weight make it suitable for truck-mounted drilling rigs and rig floors with restricted installation space.
Make-Up and Breakout Torque
Make-up torque and breakout torque are different requirements. Breakout torque is often higher and must be stated separately.
The technical proposal should identify:
Rated make-up torque
Rated breakout torque
Spinner torque
Low- and high-speed range
Torque-control method
Torque indication
Calibration method
Automatic stop or preset torque function, where supplied
Connection torque values must come from the approved connection or tool-joint torque chart. They should not be estimating from pipe OD.
Mounting Arrangement
RIGRS Iron roughnecks are supplied with a positioning system that moves the working head between its parking position and the well centre.
Available arrangements may include:
Pedestal mounting
Floor-socket mounting
Track mounting
Articulated arm
Project-specific retrofit mounting
The correct arrangement depends on the rig-floor structure, setback position, mousehole location, well-centre clearance and available parking envelope.
Hydraulic and Electrical Requirements
Before the machine is selected, confirm the available rig hydraulic supply.
Required information includes:
Hydraulic working pressure
Available flow rate
Supply and return connection sizes
Fluid specification
Filtration requirement
Maximum return pressure
Cooling capacity
HPU supplied by RIGRS or by the rig
Electrical voltage and frequency
Control voltage
Hazardous-area requirement
Emergency-stop interface
Hydraulic pressure alone is not sufficient. A machine can have enough pressure but still operate too slowly if the available flow is inadequate.
RIGRS Iron Roughnecks Control Options
Depending on the supplied configuration, controls may include:
Local manual control
Remote pendant
Wireless remote
Driller’s-cabin interface
Preset make-up torque
Torque display
Interlocks
Emergency stop
Jaw and head-position indication
Maintenance and diagnostic functions
If integration with the rig control system is required, provide the communication protocol, I/O list and hazardous-area requirements before quotation.
RIGRS Iron Roughneck Documents and Testing
Each machine ships with: factory acceptance test record, hydraulic test, material test reports for the load-bearing parts, operating manual, drawings. Third-party inspection can be added.
Dies and Spare Parts
We supply dies, seals and wear parts for each model.
Installation and Support
Remote commissioning guide, on-site installation and training: what is included, what costs extra, and the countries where an engineer can attend.
Request RSW-Series Model Selection
Email: info@rigrs.com
WhatsApp: +86 18615995257
RIGRS Iron Roughnecks – FAQ
Q1: Which RSW-series iron roughnecks has the highest torque?
A: The RSW10-D1, RSW10-E1 and RSW12-D1 provide the highest published ratings in the series: 140,000 N·m make-up torque and 160,000 N·m breakout torque.
Q2: Which model is intended for a truck-mounted drilling rig?
A: The RSW06-D1 is the compact truck-rig model. It handles 3-1/2 in drill pipe through 8 in drill collars and provides 60,000 ft-lb make-up torque and 80,000 ft-lb breakout torque.
Q3: Which model is rail mounted?
A: The RSW10-E1 is the rail-mounted model. Its horizontal travel depends on the selected rail length, so the parked position, well centre and required travel must be shown on the rig-floor drawing.
Q4: What hydraulic supply is required?
A: Most RSW-series models require 17.5 MPa rated pressure, up to 21 MPa maximum pressure, 140 L/min rated flow and at least 120 L/min minimum flow. The SW08-D1 uses a lower published pressure range of 16 MPa rated and 17.5 MPa maximum.
Q5: Iron Roughnecks is wireless control included?
A: Remote control and wireless control are standard for the published SW-series configurations. Integration with the rig control system is optional and must be defining during the interface review.
Q6: Can the machine handle inclined pipe?
A: Yes. An optional inclined-pipe package supports make-up and breakout at pipe angles from -10 to +10 degrees. The pipe angle and joint position must be including in the rig-interface drawing.
Q7: Can it operate automatically?
A: A fully automatic package is available with position feedback, machine vision and automatic tool-joint recognition











